Used Cleaver-Brooks CBEX 800 HP industrial firetube boiler

Used Industrial Boilers for Sale: Steam Boilers from 10 to 1,000 HP

Boiler Guides

Used Industrial Boilers for Sale

A used industrial boiler can put a plant back on steam for a fraction of the cost and lead time of a new unit. Boilers.com buys and sells used commercial and industrial boilers and ships nationwide from Miami, Florida. Our inventory runs from a 10 HP Fulton vertical up to a 1,000 HP Hurst, with packaged firetube units from Cleaver Brooks, Hurst, Superior, Columbia, and Fulton, plus industrial watertube and electric steam boilers.

This guide explains how to size a used industrial boiler, the main types we carry, a sample of what is in stock now, and what to check before you buy.

2023 800 HP Cleaver Brooks CBEX-2D 200-800-150ST firetube steam boiler, 150 PSI, dual fuel
In stock: 2023 Cleaver Brooks CBEX-2D 200-800-150ST, 800 HP, 150 PSI, dual fuel

How industrial boilers are rated

Most industrial steam boilers are sold by boiler horsepower (HP). One boiler horsepower is the evaporation of 34.5 pounds of water per hour from and at 212°F, which equals about 33,475 Btu/hr of output. So a 200 HP boiler is rated about 6,900 lbs/hr of steam, and a 500 HP boiler is rated 17,250 lbs/hr. Actual steam in your plant will be lower when feedwater is cold or operating pressure is high.

Pressure matters as much as size. In the US, steam boilers that operate above 15 PSI are power boilers built to ASME Section I and stamped “S”. Low pressure steam boilers, rated 15 PSI or less, and most hot water heating boilers are built to ASME Section IV. A used boiler’s nameplate and National Board number tell you which code it was built to and its maximum allowable working pressure. Match that to your process, not just the horsepower.

Key specs at a glance

Figures from the article’s rating explanation and current inventory range. A used boiler’s nameplate is the authority for that specific unit.

10 to 1,000 HPCurrent inventory range, from a Fulton vertical to a Hurst
34.5 lbs/hr per HPOne boiler horsepower, from and at 212°F
6,900 lbs/hrRated steam for a 200 HP boiler
17,250 lbs/hrRated steam for a 500 HP boiler
Above 15 PSIPower boilers, ASME Section I, stamped “S”
Firetube, watertube, vertical, electricTypes we carry

Types of used industrial boilers we carry

  • Packaged firetube (scotch marine) steam boilers. Most of our inventory. Hot gases pass through tubes surrounded by water. They are simple to install and service. In our inventory they run from 40 HP to 1,000 HP, including Cleaver Brooks CB, CBLE, CBEX, and CBW models, Hurst, Superior, and Columbia units.
  • Industrial watertube steam boilers. Water runs inside the tubes and the fire is outside. These suit higher pressures and larger steam loads, such as a D-type package boiler at 250 PSI or more.
  • Vertical tubeless boilers. Compact units like the Fulton VSRT and Fulton Classic for small steam loads and tight boiler rooms.
  • Electric steam boilers. No combustion, no stack, and no gas train. A good fit where fuel is not available or emissions permits are hard to get.

Not sure which design fits your plant? Read firetube vs watertube boilers.

Used industrial boilers in stock

Here is a sample of current listings, with figures from each listing’s nameplate or listing data. Inventory changes often, so browse all used boilers or call for the latest.

Large firetube steam boilers (400 to 1,000 HP)

A 2023 800 HP Cleaver Brooks CBEX-2D 200-800-150ST (yard tag BSCB800HP9182), located in Miami. It is a 150 PSI dual fuel unit that fires natural gas and No. 2 oil, with 26,780,000 Btu/hr gross output and a maximum gas input of 32,659,000 Btu/hr. The nameplate is marked 9 ppm NOx.

A 2022 500 HP Cleaver Brooks CBEX-2W-700-500-150 (yard tag BSCB500HP9058), located in Colorado. It is a 150 PSI natural gas boiler with 16,738,000 Btu/hr gross output, a maximum input of 20,412,000 Btu/hr, and 30 ppm NOx on the nameplate. Cleaver-Brooks rates the CBEX-2W 500 HP at 17,250 lbs/hr from and at 212°F.

A 2007 500 HP Superior Boiler X6-5-2500-S150 “Super Seminole” (yard tag BSSB500HP288), located in Ohio. It is a 3-pass wetback scotch marine boiler, 150 PSI, ASME “S” stamped, with 17,250 lbs/hr of steam capacity, 2,514 sq ft of heating surface, and an Industrial Combustion packaged burner on a structural steel skid.

A 2011 400 HP Hurst S2000-15-9 (yard tag BSH400HP289), located in Ohio. This is a low pressure, 15 PSI, 4-pass scotch marine steam boiler rated 13,800 lbs/hr with 2,000 sq ft of heating surface. Burner and control panel are included, with a Yaskawa VFD in the panel.

A 2003 Hurst S5000-350-1 (yard tag BSH350HP978), located in Mexico. The seller states 1,000 HP. The nameplate lists 350 PSI maximum working pressure, 34,500 lbs/hr of steam, 5,000 sq ft of heating surface, and an ASME Section I “S” stamp.

Mid-size and high pressure firetube boilers

A 2019 125 HP Cleaver Brooks CB 400-125-250 ST (yard tag BSCB250PSI92995) rated for 250 PSI maximum working pressure, for plants that need higher pressure steam in a smaller package. Fuel is not specified on the tag, so confirm the burner and fuel train before you buy.

We also carry many 100, 150, 200, 250, and 350 HP Cleaver Brooks units. See used Cleaver Brooks boilers, 100 HP Cleaver Brooks boilers, and 150 HP Cleaver Brooks boilers, or our guide to the Cleaver Brooks CB700-150.

Industrial watertube steam boilers

A 2013 Cleaver Brooks (Nebraska) NB-100D-35 D-type watertube boiler, located in Chicago, Illinois. It was built by Cleaver-Brooks in Lincoln, Nebraska, and the nameplate lists 20,000 lbs/hr maximum design steam capacity, 250 PSIG MAWP, and 1,606 sq ft of heating surface, with National Board No. 4704. It has a Natcom burner, and the photos show an economizer and access platforms.

A 2010 Cleaver Brooks Delta 60 watertube steam boiler, located in Mexico, listed at 31,000 lbs/hr of steam at 350 PSI. Those figures are as provided by the seller and have not been verified from a nameplate, so inspection is recommended.

For biomass users, we list a 2011 Wellons 450 kW biomass cogeneration plant in Canandaigua, New York. It includes two 300 HP, 450 PSI wood chip fired steam boilers rated 10,000 lbs/hr each on the nameplate, an Elliott steam turbine, a Marathon generator, an electrostatic precipitator, and the fuel feed system. It is new surplus with about 800 operating hours.

Electric and small steam boilers

A 2015 Sussman SSB135 electric steam boiler (yard tag BSS144KW252), located in Ohio. It is a 144 kW stainless steel unit, 480V 3-phase, rated 500 lbs/hr of steam, with a 100 PSIG MAWP and trimmed to operate at 25 PSIG. For small gas-fired steam, see the 2017 Fulton VSRT 30 and 2018 Fulton VSRT 20.

What to check before you buy a used industrial boiler

A used boiler is only a good deal if it fits your load and passes inspection. Inspect it in person, or have a qualified inspector do it, and match every claim to the nameplate and the records.

FAQ

How do I size a used industrial steam boiler?

Start with your peak steam load in lbs/hr and divide by 34.5 to get boiler horsepower. Add margin for future load and for losses at your operating pressure and feedwater temperature. Then match the boiler’s design pressure to your process.

What brands of used industrial boilers do you sell?

Mostly Cleaver Brooks, plus Hurst, Superior, Fulton, Columbia, Sellers, Sussman, Unilux, and Wellons. Stock changes, so check used boilers for what is available today.

Are your used boilers inspected?

Each listing shows the data we have from the nameplate and the seller, and notes what is not confirmed. We recommend an inspection by a qualified boiler inspector before purchase, and we can help arrange one.

Do you ship used boilers nationwide?

Yes. We serve buyers across the US from Miami, Florida, and we can help arrange rigging, freight, and delivery. Boilers are located at sites across the country and in Mexico, so ask about the location of any unit you are considering.

Can I rent a boiler while I wait?

Yes. If you need steam right away, ask about our boiler rentals.

How do I get pricing?

Our listings are call for price. Call (305) 428-2777 or use our contact page, and tell us the steam load, pressure, fuel, voltage, and timing you need. If you have an industrial boiler to sell, see we buy boilers.

Find the right used industrial boiler

Start with our full list of used boilers for sale, or tell us what your plant needs and we will match it to units in stock. For a quote, help with sizing, or inspection and freight, contact us or call (305) 428-2777. We serve plants nationwide from Miami, Florida.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *