Used Cleaver Brooks 100 HP Boilers

The 100 HP Cleaver-Brooks is one of the most sought-after used industrial boilers in America — big enough to run a serious steam operation, without stepping up to a utility-scale unit. Boilers.com specializes in used and refurbished Cleaver-Brooks boilers, and 100 HP units are among the first to sell when they hit our yard. Most of the units we handle are the classic CB 700-100 series: 150 PSI high-pressure steam, natural gas fired.

Who runs a 100 HP boiler? Commercial laundries, food and beverage plants, breweries and distilleries, hospitals and nursing homes, schools, and light manufacturing — anywhere that needs dependable process steam day in and day out.

Current Availability

About the Cleaver Brooks 100 HP

A 100 HP Cleaver-Brooks firetube boiler produces approximately 3,450 lbs of steam per hour, with a fuel input of roughly 4.2 million BTU per hour. The classic CB series uses a four-pass dryback design with about 500 square feet of heating surface — five square feet per boiler horsepower, a conservative design that is a big reason these boilers routinely stay in service for 30+ years. Typical footprint is roughly 15½ feet long by 6 feet wide, at around 9,500 lbs.

Most units are configured for 150 PSI high-pressure steam — the standard for process-steam applications — though low-pressure 15 PSI versions exist for heating service, and the design is rated up to 350 PSI. Firing options include natural gas, light oil, or a combination gas/oil burner, typically with 4:1 turndown.

What to Check When Buying Used

When we take a 100 HP Cleaver-Brooks in on trade at Boilers.com, the first two things we look at are the tubes — to make sure they’re in good condition — and whether the controls have been updated. Those two checks tell you most of what you need to know about a used unit. Beyond that, look at waterside scale (it tells you how well the water treatment was maintained), refractory condition in the rear door, and always confirm the National Board number and the unit’s inspection status. Every listing at Boilers.com includes the NB number, full specifications, and detailed photos, and you can request an inspection report on any unit.

Common Questions

How much steam does a 100 HP boiler produce?

About 3,450 pounds of steam per hour at 212°F. That makes 100 HP the sweet spot for mid-size industrial and institutional steam loads.

How much does a used 100 HP Cleaver-Brooks cost?

It depends on age, condition, controls, and configuration — two units with the same nameplate can be very different machines. Request a quote on a specific unit and we’ll price it with full specs and photos.

What’s the difference between the 15 PSI and 150 PSI versions?

Low-pressure (15 PSI) units are built for heating service; 150 PSI high-pressure units are built for process steam. Most industrial buyers need the 150 PSI configuration, and it is what we most often have in stock.

Looking for a 100 HP Cleaver Brooks?

Tell us what you need — pressure, fuel, timeline — and we’ll match you with a unit from our inventory or source one through our nationwide network. Browse all used boilers, call 305-428-2777, or send the form below.

Contact Form Demo